| AD CATEGORY :: Engines :: Drag Racing |
Ad #1327161 Posted:2008-10-27 10:47:24
This ad expired 7 days ago.
Huntsville Engine 615 - all aluminum
28 runs total, Big Cheif, Bob Book carb
Huntsville Engine and Performance all aluminum 615" BBC, perfect for T/D or fast brackets.
Brodix tall deck, .400 raised cam aluminum block.
Dart 18 degree big chief castings, Todd Ewing's personal heads. Ported and flowed by Brodix and HEPC.
Titanium valves & keepers
Single 4 ported Brodix intake
NOS Fogger system plumbed into intake
Callies Magnum XL Crank
GRP Aluminum Rods
JE pistons, .043, 1/16, 3/16, .990 pin
7/4 swap cam, 55MM
55mm roller cam bearings
Bushed and located lifter bores
.904 Crane micronited, peened and polished lifters
Erson Springs
Jesel shaft rockers w/A2000 bolts
Jesel belt drive
7/16 pushrods
Rattler balancer
Moroso aluminum pan
CSR Flexplate
MSD Crank trigger
MSD Crank trigger distributor
Moroso Wires
Moroso sheet metal valve covers, powdercoated
Bob Book gasoline Dominator
Aeromotive belt drive pump
BG adjustable fuel log w/regulator
Holley regulator for NOS enrichment
Moroso 4 vane vac pump
Aeromotive vac puke can
Aeroquip nylon braided line for vac system, fuel system and bypass return
Matching PTC nitrous converter, NEW, unused.
Motor was just pulled in above configuration from a 2004 Mullis swing arm. It's been as fast as 4.44 on the motor, and prior to the PTC converter, 6.90's in the 1/4 on a very light nitrous tuneup with a way too loose converter, hence the new converter. Assembled just 28 passes ago at Huntsville Engine with all new parts, except the cylinder head castings and some of the bolt on accessories. This motor has been sprayed 11 times total. Run it on or off the bottle, it'll be fast either way.
A brand new one will run you near $31,500 with all of the above accessories, or you can buy it here for $22,250 including the converter, or $21,500 less the converter. Todd Ewing at Huntsville Engine will be glad to vouch for the condition of the motor and the history, so feel free to contact either one of us with questions.
JB Strassweg
812-434-2203
info@DragstersForSale.com
www.DragstersForSale.com
Brodix tall deck, .400 raised cam aluminum block.
Dart 18 degree big chief castings, Todd Ewing's personal heads. Ported and flowed by Brodix and HEPC.
Titanium valves & keepers
Single 4 ported Brodix intake
NOS Fogger system plumbed into intake
Callies Magnum XL Crank
GRP Aluminum Rods
JE pistons, .043, 1/16, 3/16, .990 pin
7/4 swap cam, 55MM
55mm roller cam bearings
Bushed and located lifter bores
.904 Crane micronited, peened and polished lifters
Erson Springs
Jesel shaft rockers w/A2000 bolts
Jesel belt drive
7/16 pushrods
Rattler balancer
Moroso aluminum pan
CSR Flexplate
MSD Crank trigger
MSD Crank trigger distributor
Moroso Wires
Moroso sheet metal valve covers, powdercoated
Bob Book gasoline Dominator
Aeromotive belt drive pump
BG adjustable fuel log w/regulator
Holley regulator for NOS enrichment
Moroso 4 vane vac pump
Aeromotive vac puke can
Aeroquip nylon braided line for vac system, fuel system and bypass return
Matching PTC nitrous converter, NEW, unused.
Motor was just pulled in above configuration from a 2004 Mullis swing arm. It's been as fast as 4.44 on the motor, and prior to the PTC converter, 6.90's in the 1/4 on a very light nitrous tuneup with a way too loose converter, hence the new converter. Assembled just 28 passes ago at Huntsville Engine with all new parts, except the cylinder head castings and some of the bolt on accessories. This motor has been sprayed 11 times total. Run it on or off the bottle, it'll be fast either way.
A brand new one will run you near $31,500 with all of the above accessories, or you can buy it here for $22,250 including the converter, or $21,500 less the converter. Todd Ewing at Huntsville Engine will be glad to vouch for the condition of the motor and the history, so feel free to contact either one of us with questions.
JB Strassweg
812-434-2203
info@DragstersForSale.com
www.DragstersForSale.com
This ad expired 7 days ago.
DragstersForSale
Info@DragstersForSale.com
Evansville, IN 47735
812-305-3666
Ad posted by: dragstersforsale (#1465)
RaceSpace Profile: View
Member Since: 2003-01-21
Number of Honor Payments: 0
Average Accepted Sale Price: $0.00
Average Honor Payment: $0.00
Phone Number: 812-434-2203
RESOURCE LINKS
| Home | Classifieds | About | Contact | Store | Advertise | Affiliate Program | Pricing Guide | FAQ | Send Link to a Friend |
|
Copyright ©2005 RacewayMedia LLC All Rights Reserved.
Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the RacewayMedia LLC Terms, Classified Guidelines and Privacy Policy |
|
Raceway Media, LLC
PO Box 491, North Adams, MA 01247 Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com |
|
Execution Time: 597 ms |